|
The TUFD is a tactical flotation device serving as an emergency flotation device, designed to negotiate water obstacles and to float equipment.
Water obstacles are no longer a problem
 The TUFD Tactical Universal Floatation Device was specially designed to give a soldier with battle gear (minus pack) a floatation device that can conviently attach from waist up, anywhere he chooses that he can reach to activate it; without the restrictions and discomfort of water wings or similar devices. It can be used as a emergency floatation device, a device to negotiate water obstacles and a device to provide floatation for equipment for example on boat operations.
Uses:
• Emergency floatation device
• Floatation to negotiate and cross water obstacles
• Flotation device for rescue swimmers
• Floatation device for equipment
• Floatation for underwater recovery of objects and
explosive devices
Lift capability:
We rate it for 40lbs of lift with 38 gram CO2 cartridge. We tested it with 50lbs at 10ft depth a warm day, water temperature 82o, lift was good and buoyancy was good.
Features:
• Bladder with attached waist strap
• Tether with quick disconnect (rated for 300lbs) and
looped end
• Halkey detonator uses 38 gram 3/8” thread
• Halkey Oral valve (inflator)
• Over pressure valve
• Compact deployment case with molle attachment
• Attachment loop with fastex located rear top of case
• Molle
• Belt loop
• Quick release buckles (harness assembly)
Options:
• Harness assembly
• Auto detonator with water sensor
• Bladder blaze orange or black
Specifications:
Size: 6” Tall x 3” deep x 3” wide
Tether: 22” long x 1” wide
Bladder: (Bowtie shaped) uninflated flat 37” wide x 14” at its tallest and 8” at its narrowest. Inflated 33” x 11” x 5.5”narrowest and 26” circumferance
Weight: 1.35lbs with cartridge
Lift capability:
We rate it for 40lbs of lift with 38 gram CO2 cartridge.
We tested it with 50lbs at 10ft depth a warm day, water
temperature 82o, lift was good and buoyancy was good.
Features:
• Bladder with attached waist strap
• Adjustable Tether with quick disconnect
(rated for 300lbs) and looped end
• Halkey detonator uses 38 gram 3/8” thread
• Halkey Oral valve (inflator)
• Over pressure valve
• Compact deployment case with molle attachment
• Attachment loop with fastex located rear top of case
• Zippered compartment at bottom of pack with mesh
material for drainage
• Molle
• Belt loop
• Quick release buckles (harness assembly)
Options:
• Harness assembly
• Bladder blaze orange or black
Specifications:
Size: 6” Tall x 3” deep x 3” wide
Tether: 22” long x 1” wide
Bladder: (Bowtie shaped) uninflated flat 37” wide x 14” at its tallest and 8” at its narrowest. Inflated 33” x 11” x 5.5” at its narrowest and 26” circumferance
Weight: 1.35lbs with cartridge
Materials:
• 1000 Denier Cordura® urethane coated 1.75oz, nylon mesh 18oz
• Bladder: 200 Denier single urethane coated nylon
• YKK® zippers
• 100% nylon webbing
CLICK HERE FOR INSTRUCTIONS>>>
(to save PDF right click link this 'save link as')
|
Share...
